11-Nor-Delta-9-Tetrahydrocannabinol-9-Carboxylic Acid {Carboxy-THC} aka, THCM is one of the most mysterious cannabis derivatives thus far, acting as a byproduct found in cannabis smoke. It’s never been isolated, nor do we even know whether or not it’s psychoactive or potentially beneficial. One thing that has been suggested repeatedly is that THC-M acts as a potentiator of other cannabinoids – in other words, when taken with other cannabinoids, the effects of those other cannabinoids become stronger.
Because of how little we know about THCM and THC-M products, you may have a hard time figuring out how much of it to even take. Allow us to help you figure out the ideal dosage based on what we know so far.
To Buy THC-M Products Click Here
THC-M Dosage vs. THC-M Strength
Before discussing the top dosage for THC-M products, let’s talk about strength versus dosage, as both of these factors are equally important.
Dosage: Dosage reflects the amount of product that we take, such as 4 puffs off of a vape cartridge, or 1 gummy.
Strength: Strength reflects the number of milligrams of THC-M in the product, which tells us how potent the product is. A dropper of a THC-M tincture can contain any number of milligrams of THC-M, and so the same amount of a specific type of product can vary a lot in terms of how much of the cannabinoid you’re actually consuming.
THC-M Dosage Guide Chart:
- Beginner THC-M dosing (low tolerance): 1mg-5mg per use
- Intermediate THC-M dosing (medium tolerance): 5mg-10mg per use
- Advanced THC-M dosing (high tolerance): 10mg-15mg+ per use
This applies to THC-M disposable vape, THC-M vape cartridges, as well as other THC-M products. The best way to dose out THC-M is to try a very tiny amount, then slowly until you feel what you need. Product by product THC-M dosing will be shown below.
Where To Buy THC-M Vapes & Products In Your State
The best place to buy THC-M products is from Binoid, one of the largest and best THCM brands that has a wide variety of THC-M disposables, THC-M Gummies and THCM Tinctures for you to enjoy. Binoid has 1000s of five star reviews for Binoid products that people are loving.
How Long Does THC-M Take To Work?
THC-M products kick in within 25 minutes if vaped or dabbed. THC-M products work like how any other product that you would inhale. However, just like Delta 9 THC, be careful with hitting because you might feel the need to take more when in reality it has not hit you yet. For this reason, we suggest waiting at least 2 hours before taking more THC-M products. Especially as they are extremely potent and may creep up before kicking in.
THC-M Dosing Instructions
Often, you’ll find that the company that makes the THC-M product has a recommended dosage chart amount somewhere on their packaging, which allows you to know how much you should take in one sitting to consume an “average” amount of THC-M.
This is a good piece of information to follow when getting started, as the manufacturer knows how much of their product you should take to generally experience the desired effects. For example, Binoid has THC-M dosing information on all of their THC-M product packaging.
Factors That Influence How Much THC-M You Might Want to Take
Before diving into general THC-M dosing guidelines, we need to point out that at the end of the day, the amount that’s right for you can depend on several different variables. Allow us to elaborate.
#1: Your Tolerance to THC-M
Basically, each individual has their own tolerance to cannabinoids as well as a distinctive sensitivity to their effects, depending on how their endocannabinoid system is structured. And, we know that those who are totally new to cannabis are likely to have a very low tolerance overall.
If you’ve never taken any cannabinoids before, you probably have a very low tolerance to THC-M’s properties, which means that an extremely low dose will feel potent in your system. If you’re a seasoned consumer, you may find that you already have something of a tolerance to its effects that allows you to take a more standard dosage as a first-timer.
#2: The Product Type
One thing that’s true with all cannabinoids is that the product type and delivery method have a lot to do with how we’re affected. The more bioavailable (easily absorbed into the body) the delivery method, the more potent, fast-acting, and short-lived the high will be.
Inhaling THC-M, like with vapes or flower, means the strongest effects, typically felt within minutes, while edible doses take a while to kick in and offer something of a more gradual peak that’s slightly subdued. Tinctures are somewhere in the middle. Then, with dabs (concentrates), you’ll have the most potent high by far.
#3: What You Want Out of Your Experience
Maybe you’d like to go with a low dose of a THC-M product, because the idea of a milder high is something that appeals to you. Or maybe, you’re looking to dab a THC-M product because you want to get as high as possible, in which case you’d likely be comfortable with a pretty high dose.
#4: The Strain
As you may know, the strain of the THC-M product can influence how strong it is, which is the case with flower, dabs, and vapes. Different strains have different amounts of THC in them, and so some strains are just more intoxicating than others. Research the strain you’re buying to find out how potent it is, and dose accordingly.
#5: Other Cannabinoids You’re Taking
If you’re also taking other cannabinoids, especially psychoactive ones, you might want to take less THC-M. For example, if you’re taking THC-M along with HHC-P, you might want to lessen the THC-M dose so that you don’t get too high.
What’s the Proper THC-M Dosage?
For the time-being, THC-M is only available in vape form. But, how much is the ideal dosage when vaping? We’ve broken our dosage guide into three categories based on the different levels of potency consumers may be looking for.
#1: THC-M Vape Cartridges
THC-M vape cartridges are going to give you a pretty strong and fast-acting high thanks to the superior bioavailability of this type of delivery method. To calculate the number of milligrams you’re getting out of every puff of vapor, you’ll want to determine the total milligram strength of the cartridge as advertised by the product maker, and divide that by the number of milliliters in the cartridge. Then, divide that number by 100, as there are about 100 puffs, give or take, in each milliliter of vape oil.
Low Dose: 1-5mg
Moderate Dose: 5-10mg
High Dose: 10mg+
Now, maybe you prefer a more basic dosing guideline based on the number of puffs you should take, that doesn’t require any calculations. How deeply you inhale will affect how strong each puff is, so just keep that in mind.
Low Dose: 1 puff
Moderate Dose: 2-4 puffs
High Dose: 4+ puffs
#2: THC-M Disposable Vape Pens
There are also THC-M disposable vape pens, which use the same rules of dosing as vape carts, discussed above. Disposables are designed differently from vape carts and their accompanying batteries, but the vape oil formula that’s found in their cartridges is the same, as is the output level of the device that determines the amount of vapor produced by a single draw. So, once again, the formula for figuring out how many milligrams of a vape disposable are:
Low Dose: 1-5mg
Moderate Dose: 5-10mg
High Dose: 10mg+
And, once again, if you want a more straightforward approach to deciding how much to vape, just follow these guidelines below:
Low Dose: 1 puff
Moderate Dose: 2-3 puffs
High Dose: 4+ puffs
Your THC-M Dosage Ultimately Comes Down to Your Needs
So, how much THC-M is right for you? It all depends on how strongly you want to feel the cannabinoid. Still, a little bit of guidance always helps. In fact, Binoid’s THC-M products come with simple dosing directions on the label, to make the process of figuring out how much to take a little easier.
Consider starting with a low dose as a beginner, and working your way up over time, to find your own sweet spot with this exciting new cannabinoid.
